氧氮氫分析儀的使用注意事項：

1 、氧氮氫分析儀在初次啟用前，應該對連接點、焊點、閥門等進行檢漏，以確?？諝庵械难醪粫礉B進入管道及儀器內部，造成測量數值偏高。

2、再次使用儀器前，要進行管道系統(tǒng)凈化，將漏入的空氣除干凈，同時確保連接取樣管路時沒有漏入空氣。

3、樣氣中氧含量的變化會受管道材質及表面粗糙度影響，因此一般連接管路選用銅管或拋光過的不銹鋼管，而不用塑料管、橡膠管等。

4、微量元素分析時，要避免各種管件、閥門、表頭等死角對樣氣造成污染，因此必須盡可能的簡化氣路系統(tǒng)，連接件死角要小，以防止溶解氧逸出造成污染，使用水封、油封及臘封等設備，才能較好的確保數據的。

改進的紅外檢測池技術。北京美國LECO分析儀廠家供應

Instrument calibration/drift correction

f. Clean the upper and lower electrode manually, or, if applicable, remove the crucible and press the analyze button to clean with the automatic cleaner.

g. Firmly place a graphite crucible on the lower electrode tip.

h. Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.

i. Repeat steps 3b through 3h a minimum of three times for each calibration/drift standard used.

. Calibrate/drift following the procedure outlined in the operator's instruction manual.

736 Series: Oxygen/Nitrogen by Inert Gas Fusion

The 736 family of Elemental Analyzers is designed for routine measurement of oxygen and nitrogen content of

inorganic materials, ferrous and nonferrous alloys, andrefractory materials using the inert gas fusion technique.

These instruments feature our Cornerstone brand ® software, a custom interface designed specifically for

touch-screen operation. Developed by combining longterm research with customer feedback, this easy-to-use

software gives you complete access to instrument control, analysis settings, diagnostics, reporting, and more—without sacrificing valuable bench space.

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Calibrate/drift following the procedure outlined in the operator's instruction manual.

Login Sample with the appropriate number of reps.

Weigh approximately *** grams of appropriately prepared sample into a *** Nickel Capsule, enter mass and sample identification into appropriate rep fields. If applicable, place the nickel capsule in the

appropriate autoloader position.

Repeat steps 3c through 3i for sample analysis.

company profile

Shanghai Uzong Industrial Co., Ltd. (hereinafter referred to as UZONGLAB®) is a high-tech company that provides integrated solutions for intelligent laboratories, mainly serving the Chinese market and countries along the “Belt and Road”. It has three business divisions and one The technology center, namely the instrument business department, consumables business department, project development department, and Zhongyu Lianhe Technology Center. In addition to the Shanghai headquarters, we have established branches in Beijing, Shenyang, Shijiazhuang, Taiyuan, Qingdao, Guangzhou, Chengdu and Urumqi. To provide customers with more professional, safer and more convenient products and services is our sole goal. 國際**的非色散紅外及熱導檢測器 ，無移動部件，不需要手動調整。北京美國LECO分析儀廠家供應

裝有自動旁路閥的可快速拆裝氧水捕集裝置。北京美國LECO分析儀廠家供應

User-Friendly Brand Software Cornerstone

LECO's exclusive brand software enables the user to have complete access to analysis Cornerstone control, method settings, diagnostics, reporting, and more in a highly organized and immersive environment. Designed through a collaboration of customer feedback and innovative engineering,Cornerstone allows the user to conduct all of their day-to-day operations within a single Analysis screen designed for speed and ease-of-use. Our innovative grouping of sample data into sets and replicates simplifies the data output and automatically calculates relevant statistics, alleviating the need for additional data processing.

北京美國LECO分析儀廠家供應